Beko BEVPI 120 User Manual page 13

2 Unit specifications and features
• Sleep operation
The SLEEP function is used to decrease energy use while you sleep (and don't need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the unit will increase
the temperature by 1°C (2°F) after 1 hour, and will increase an additional 1°C (2°F) after another
hour. When in HEAT mode, the unit will decrease the temperature by 1°C (2°F) after 1 hour, and will
decrease an additional 1°C (2°F) after another hour.
It will hold the new temperature for 5 hours, then the unit will turn off automatically.
C
Note: The SLEEP function is not available in FAN or DRY mode.
SLEEP Operation
+/- 1 C/2 F
+/- 1 C/2 F
Set 7 hours
temperature timer off
1hr
1hr
Saving energy during sleep
13 / 60 EN
Split-type room air conditioner / User Manual