Press Menu - Bushnell 119636C Instruction Manual

Parameter Display
The settings for a parameter are shown on the display as follows:
Only one setting is displayed at a time, starting with the current setting
for the parameter when it is first selected (Fig. 4a). To change the
setting, use the UP/DOWN keys to display the new setting you want
(Fig. 4b), then press OK to "Execute" (make the actual change to this
setting). If you want to confirm this setting is now the current one, just
press the RIGHT key to scroll to the next parameter, then press LEFT
to go back again to the previous one. You should see the parameter
setting you just made.
Fig. 4: Selecting Parameter Settings

Press MENU

12
All manuals and user guides at all-guides.com
(4a)
Press DOWN to select new setting
for the highlighted parameter
(4b)
Press OK to confirm and execute
the new setting