Maintenance Instruction; Cleaning And Maintenance; Chain Tensioning - Prodana Seeds Proseeder HP600 Operating Instructions Manual

HP 600
The push or pull model:
By moving the operating bar you can choo-
se between either model. Pull out the bot-
tom split pin on each side and pull the ope-
rating bar out of the steel tube.
The bar can now be mounted on the oppo-
site side and fixed into position with the
two split pins. The height of the operating
bar can be adjusted by choosing a different
hole in the inner tube.

Maintenance instruction

Cleaning and maintenance:

After 100 hours use or every 3 months the
machine should be completely checked and
cleaned.

Chain tensioning

In time, wear in the chain will cause it to
stretch and become loose. To tighten the
chain, loosen the eccentric roller bearing on
the right. Turn the bearing with the spanner
supplied until the chain is suitably tensio-
ned, then retighten the bearing.
6