Table of Contents
Advertisement
10
Don't use any essential substances such as diluents, petrol or various cleaners to clean the
d-balls. Use a soft wetted cloth, eventually a neutral cleaning agent.
The remote controller is not water resistant. Protect it from water and humidity as much
as possible. If dropped into water, the device will probably be damaged permanently.
The ball dropper is designed to be able to stay in the rain for a short time after closing the
cover of the ball container.
The set remembers the configuration settings (autocoding). It stays in the last selected
mode after you switch it on again.
11
Do the following before you consider your device defective:
Read the user's guide again and check whether the problem isn't caused by weak batteries
or incorrect use.
Check the correct polarity and position of batteries.
If it doesn't help, reprogram the ball dropper according to the instructions in this user's
guide.
If the problem prevails, try to initialize the system by removing batteries from the holder
in the ball dropper and from the remote controller. Create a shortcut to the contacts using
a steel tool (screwdriver, scissors for instance) for about 2 seconds. Insert the batteries
again and carry out matching.
If the problem still prevails, contact your dealer.
MAINTENANCE
TROUBLESHOOTING
9
Advertisement
Table of Contents
