Table of Contents
Advertisement
3.2
AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic
system configurations, which is stored in the battery-backed CMOS RAM and BIOS
NVRAM so that the information is retained when the power is turned off.
To enter BIOS Setup, press <Del> or <F2> immediately while your computer is
powering up.
The function for each interface can be found below.
Main – Date and time can be set here. Press <Tab> to switch between date elements
Advanced – Access and configure advanced processor options and features.
Chipset – Chipset and host bridge options and features
Boot – Set boot options including boot priority and Quiet Boot option
Security – The setup administrator password can be set here
Save & Exit –Save your changes and exit the program
Chapter 3 – AMI BIOS Setup
59
Advertisement
Table of Contents
