Garland APACHE 875 ZSL Instruction Manual page 49

To regulate the cutting height
adjustment, press the mower level
away from the lawnmower and
move it forward or backward to
the desired height.
7.3. CUTTING WITH THE LAWNMOWER
This mower has 4 different cut settings (cutting
with debris collection, with lateral discharge, rear
discharge and mulching cut. Before you begin
working, you must configure the mower to set it one
of the four possible ways.
Cutting with debris collection:
In this setting, the mower will cut the grass and send
it to the collector bag. The grass will be cut and
the rest of grass cut within the bag. For the debris
collection setting, place the bag in the back of the
machine and make sure that the lateral outlet cover
is closed and the mulching plug is not installed.
Cutting with lateral discharge:
In this setting, the cut grass exits the side of the
lawnmower and the grass debris remains on the
lawn. In this case the machine must not have the
bag installed, the rear output cover should be closed,
and the mulching plug and lateral deflector must be
installed.
Rear discharge cut:
Setting in which the cut grass will leave the back of
the machine remaining on the lawn. In this case, the
machine must not have the bag installed, the rear
outlet cover must be open, the side outlet cover must
be closed and must be not installed the mulching
plug or the side outlet deflector.
Mulching cut:
In this setting the mowed grass will be on the lawn,
but unlike the lateral discharge cutting setting, the
cut grass is crushed into small particles that are
deposited on the lawn thus generating an organic
fertilizer that provides nutrients and helps maintain
moisture. For this setting the bag and side deflector
must not be installed. The mulching plug should be
installed and the rear output cover and side cover
must be closed.
49/184
English