Endress+Hauser Thermophant T TTR31 Operating Manual page 17

TTR31, TTR35
5.1.5 Service function setting
SERV
Endress+Hauser
Service functions
Locking code
Change locking
code
Reset
Revision counter
Last device status
Simulation
output 1 or 2
(if output 2
available)
Max. indicator
Min. indicator
Enter the locking code for
enabling the device.
Freely selectable code
1...9999.
0 = no locking;
A locking code already
assigned can only be
changed by first entering
the old code for enabling
the device.
Reset all entries to the fac-
tory setting
Increases by 1 with each
configuration
Displays the last device
status to occur ≠ 0
OFF:
No simulation
OPEN:
Switch output open
CLOS:
Switch output closed
3.5:
(if analog out- Simulation values for ana-
put available) log output in mA
(3.5/4.0/8.0/12.0/16.0
/20.0/21.7)
Display of max. measured
process value
Display of min. measured
process value
Operation
17