Endress+Hauser Thermophant T TTR31 Operating Manual page 13

TTR31, TTR35
5.1.3 Basic settings
Base
Endress+Hauser
Basic settings
Technical unit
Configure zero
point
Accept zero point
Display
Damping:
display value, out-
put signal
DESINA
Operation
Select technical unit:
°C
°F
K
Position adjustment:
within ±10 °C/K (±18 °F)
of the upper range limit
No settings possible (not
available in PC software)
PV: measured value
display
PVRO: measured value
display rotated 180°
SP: set switch point
display
SPRO: set switch point
display rotated 180°
OFF: display off
OFFR: display off rotated
180°
0...40 s
Connection in accord-
ance with DESINA
guidelines
13