Usb Mouse - Toshiba Satellite M40 User Manual

Problem
The mouse pointer
moves too fast or too
slow
The response of the
TouchPad is too
sensitive

USB mouse

This section applies only with Windows
Problem
On-screen pointer does
not respond to mouse
operation
Double-clicking does
not work
User's Manual
Procedure
Try changing the speed setting in the mouse
control utility.
1. Open the Control Panel, select the Mouse
icon and press Enter.
2. Click the Pointer Options tab.
3. Set the speed as instructed and click OK.
Adjust the touch sensitivity.
1. Open the Control Panel.
2. Click the Printers icon and then the Other
Hardware icon.
3. Click the Mouse icon.
4. Click the Device Setting tab.
5. Click the Setting button.
6. The Properties for Synaptics Touchpad on
PS/2 port screen appears. Double-click
Sensitivity in the Select an item section on
the left side of the screen.
7. PalmCheck and Touch Sensitivity are
displayed. Click Touch Sensitivity.
8. Move the slide bar for Touch Sensitivity to
make an adjustment. Click the OK button.
9. Click the OK button on the Device Setting
tab.
If problems persist, contact your dealer.
®
XP operating systems.
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Try changing the double-click speed setting in
the mouse control utility.
1. Open the Control Panel, select the Mouse
icon, and press Enter.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
Troubleshooting
9-17