Dvd-Rom Drive - Toshiba Satellite M40 User Manual

Toshiba satellite m40: user guide
Hide thumbs Also See for Satellite M40:
Table of Contents

Advertisement

DVD-ROM drive

For more information, refer to Chapter 4,
Problem
You cannot access a
CD/DVD in the drive
Some CD/DVDs run
correctly, but others do
not
User's Manual
Operating
Procedure
Make sure the drive's drawer is securely closed.
Press gently until it clicks into place.
Open the drawer and make sure the CD/DVD is
properly seated. It should lie flat with the label
facing up.
A foreign object in the drawer could block laser
light from reading the CD/DVD. Make sure there
is no obstruction. Remove any foreign object.
Check whether the CD/DVD is dirty. If it is, wipe it
with a clean cloth dipped in water or a neutral
cleaner. Refer to the
Chapter 4,
Operating
cleaning.
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the CD/DVD's documentation.
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM:
DVD-ROM, DVD-Video
CD-ROM:
CD-DA, CD-Text, Photo CD
(single/multi-session),
CD-ROM Mode 1, Mode 2,
CD-ROM XA Mode 2 (Form1,
Form2), Enhanced CD
(CD-EXTRA), CD-G (Audio CD
only), Addressing Method 2
Check the region code on the DVD. It must
match that on the DVD-ROM drive. Region
codes are listed in the
section in Chapter 2,
If problems persist, contact your dealer.
Troubleshooting
Basics.
Media care
section in
Basics, for details on
Optical Media drive
The Grand
Tour.
9-8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents