Toshiba Satellite M40 User Manual page 158

Toshiba satellite m40: user guide
Hide thumbs Also See for Satellite M40:
Table of Contents

Advertisement

Problem
Some CD/DVDs run
correctly, but others do
not
Cannot write correctly
User's Manual
Procedure
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software's needs.
Check the CD/DVD's documentation.
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM:
DVD-ROM, DVD-Video
CD-ROM:
CD-DA, CD-Text, Photo CD
(single/multi-session),
CD-ROM Mode 1, Mode 2,
CD-ROM XA Mode 2 (Form1,
Form2), Enhanced CD
(CD-EXTRA), CD-G (Audio CD
only), Addressing Method 2
Check the region code on the DVD. It must
match that on the DVD-ROM drive. Region
codes are listed in the
section in Chapter 2,
If you have trouble writing, make sure you are
observing the following precautions:
Use only media recommended by TOSHIBA.
Do not use the mouse or keyboard during
writing.
Use only the software supplied with the
computer for recording.
Do not run or start other software during
writing.
Do not jar the computer during writing.
Do not connect/disconnect external devices
or install/remove internal cards during writing.
If problems persist, contact your dealer.
Troubleshooting
Optical Media drive
The Grand
Tour.
9-12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents