Operation; Overheat Protection - HOMCOM 820-297V90 Manual

OPERATION

Utilization:
1. Connect the appliance to safety socket.
2. Turn on switch to the heating position (+++++or+++ ).
3. turn on switch to the
4.Heat setting ++ 1300W
5.Heat setting +++ 2000W
6.l Turn the thermostat knob in the direction of clockwise until reaching the
maximum temperature.
7.l Once the room temperature is reached, slowly turn the thermostat knob in the
direction of anticlockwise until you get your required temperature.
8. Turn the switch to "0" position to switch off the heater. Unplug the appliance then
after.

OVERHEAT PROTECTION

The heater is protected with an overheat protector that switches off the heater
automatically in case of overheat. e.g. due to the total or partial obstruction of the
grids. In this case, unplug the appliance, wait about 30 minutes for it to cool and
remove the object which is obstructing the grids. Then switch it back on as
described above.
swing position ,the machine will oscclation
3