Midea MDWMINIPLUS User Manual page 15

Positioning The Appliance
Position the appliance in the desired location. The back should rest against the wall
behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is
equipped with water supply and drain hoses that can be positioned either to the
right or the left sides to facilitate proper installation.
Water Connection
Cold water connection
Connect the cold water supply hose to a threaded 3/4(inch) connector
and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended
period of time, let the water run to make sure that the water is clear.
This precaution is needed to avoid the risk of the water inlet to be
blocked and damage the appliance.
Please Note: If the supplied hose cloes not fit your tap, please contact
your local plumbing supply center where adapters are available for
purchase.
Connection Of Drain Hoses
The connection of the drain pipe: Put end of the drain into a sink or bucket.
Fix the drain pipe with the back
pipe of the machine.The interface
is fitted with clamps and tightened
with a screwdriver.
or
Fix the drain pipe with suction cups
14