Operations; Turning The Device On/Off - Car and Driver CDC-E4000 User Manual

3. Operations

3-1 Turning the device on/off

The device will automatically turn on when you start your car's engine, and
automatically turn off when you shut off your car.
To manually turn your Dash Cam on/off, press and hold the Power button for 2
seconds.
LED Indicator on the device
Restarting the Dash Cam
Occasionally, you may need to perform a hardware reset if the Dash Cam stops
responding or if it appears to be "frozen" or unresponsive. To restart the Dash
Cam, press and hold the Power button until the system powers off. Press the Power
button again to turn the Dash Cam on.
If the system does not shut down from holding the Power button, you can do a
forced reboot by inserting a paper clip into the "RESET" button hole on the device.
LED
Indicator
Charging
Charging
indicator
indicator
REC
indicator
REC
indicator
Description
When the device is charging, the
charging indicator glows blue.
When fully charged, the charging
indicator will turn off.
When you turn on the device, the
REC indicator glows blue. While
recording, the REC indicator will
glow blue to indicate that record-
ing is in progress.
8 EN