Video Recording Mode; Continuous Recording; Manual Recording; Playback Mode - Car and Driver CDC-E4000 User Manual

3-3 Video Recording Mode

3-3-1 Continuous Recording

By default, the system will automatically begin continuous recording a few sec-
onds after start-up. The icon
The LED light indicator besides the power button should flash red, indicating that
recording is in progress. You can manually stop the recording by pressing this
icon . Pressing it again will restart recording. The recorded video will be saved
under the "DCIM" folder on your Dash Cam's TF memory card.
Notes
Note
• In Recording mode, you can take photos by pressing this icon
• You can also enable or disable voice recording by pressing this icon
the bottom right corner of the screen.
• You can lock/unlock a recorded file by pressing this icon
• When the memory card is full, new videos will record over the oldest videos.

3-3-2 Manual Recording

You can press this icon
Press this icon

3-4 Playback Mode

1. When in Recording mode, press this icon
2. Press /
playback. You can also delete it by pressing this icon
delete the current file or all. Make sure the file is unlocked before you delete it.
3. Press this icon
icon When you lock a file, it is protected and cannot be replaced by new files
until you delete the file or reformat the memory card.
4. Press the back icon
on the upper left corner of the screen will flash.
on the Dash Cam to begin manual recording.
again to stop manual recording.
to select your desired video clip or photo, and press it to start
to lock/unlock your file. The file will be labeled with this
to exit playback mode.
to shift to Playback mode.
10 EN
.
.
. A dialog box will ask to
-
on