Operations; Turning The Device On/Off - Car and Driver EAGLEEYE CDC-570 User Manual

3. Operations

3-1 Turning the device on/off

The device will automatically turn on when you start your car's engine, and automatically
turn off when you shut off your car.
To manually turn your Dash Cam on/off, press and hold the Power button for 1 second.
LED Indicator on the device
REC indicator
Restarting the Dash Cam
Occasionally, you may need to perform a hardware reset if the Dash Cam stops responding or
if it appears to be "frozen" or unresponsive. To restart the Dash Cam, press and hold the Pow-
er button until the system powers off. Press the Power button again to turn the Dash Cam on.
If the system does not shut down by holding the Power button, you may do a forced reboot
by inserting a paper clip into the "RESET" button hole on the device.
LED
Indicator
When you turn on the device, the REC
REC
indicator glows blue. While recording,
indicator
the REC indicator flashes blue to indi-
cate that recording is in progress.
6 EN
Description