Recording Mode - Car and Driver Eye1Pro Manual

The dash cam will power up automatically when
the car is started and will power off automatically
when power to the dash cam is cut. You can also
manually turn On/Off the dash cam by pressing
and holding the Power Button.
Note: When disconnected from a power source
the dash cam will automatically begin powering
off. The internal battery will ensure the dash cam
remains on long enough to save any ongoing
recording.

RECORDING MODE

After powering on, the dash cam will automatically
enter recording mode. This is indicated by a red
recording icon appearing in the top left corner of
the screen. Press the OK Button to start/stop
recording. Press the SOS/Wifi button to lock an
ongoing recording and prevent it from being loop
recorded over.
Recording Sub-menu: To enter the recording
sub-menu press the Menu/Mode Button while not
recording. A blue video icon will appear in the top
left corner of the screen. You can adjust the video
resolution, set the length of the loop recording,
adjust the exposure, adjust the G-Sensor
sensitivity, set the time stamp and GPS stamp,
track the speed, and more.
In this menu, you may choose to turn Motion
Detection on or off. This feature turns the camera
5