Table of Contents
Advertisement
Specifications
Input
Output Current
Rated Output
Battery Type
Output Cable
Fuse
Operation Instructions
Mounting Charger
Mounting Charger to wall:
WARNING! TO PREVENT SERIOUS
INJURY: Verify that mounting
surface has no hidden utility lines
before drilling or driving screws.
1. Set Bracket against wall at desired height.
2. Install Bracket with screws into
wood studs or with mount strips.
3. Place Charger in Bracket,
secure with velcro strap.
Mounting Charger to vehicle fender:
1. Locate a mounting position that is away
from the fan blades, belts, pulleys.
Position cables to reduce risk of damage
by hood or moving engine parts.
WARNING! TO PREVENT SERIOUS
INJURY: Verify that mounting surface
has no hidden wires, brake lines or other
parts before drilling or driving screws.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Aside from the fuse, this device does not contain any user replaceable parts.
If it needs service, take it to a qualified technician. Reference UPC 193175473356.
Item 59520
For technical questions, please call 1-888-866-5797.
120VAC, 60Hz, 0.52A Max
1.5A DC Max
6/12V
LEAD ACID - Standard, Gel,
Marine, AGM, Deep Cycle
18", 18 AWG
7.5A
WARNING! DO NOT MOUNT THE
MAINTAINER DIRECTLY TO THE SIDE
OR ON THE TOP OF THE BATTERY.
Note: The double-sided adhesive
tapes are a temporary attachment. Use
provided mounting bracket and screws
for long term and safe mounting.
2. Clean area before mounting.
3. Set Bracket in place to be mounted.
4. Install Bracket with screws
or with mount strips.
5. Place Charger in Bracket,
secure with velcro strap.
Note: Periodically inspect and clean Charger
and surrounding area. If any wires are
corroded or damaged, do not use charger.
Page 5
Advertisement
Table of Contents
