Adjustments
When using the
pressure roller
When using the
pressure brush
24
NOTICE!
In order to stretch the backing paper (B) on the internal rewinder
(A), before the dispenser rocker (D, Figure 5) must be moved
forwards/upwards by pulling out the knurled knob (C, Figure 5).
5. Adjust the position of pressure roller (D) with the clamping lever
(E) in such a way that the roller and the label touch themselves
lightly.
In this way the transfer of label to the product to be labelled is
supported.
E
D
Figure 12
6. The pressure brush (D) is to be installed at a position at which the
label and the product touch each other.
E
D
Figure 13
Operating Manual
Wipe-On Applicators
10.23