Hornbach LOAN Original Installation And Operating Manual page 156

Remote control holder
The remote control holder can
be fixed at a surface by drilling
two holes.
Insert the two plugs and fix it
on the wall using the supplied
Now attach the plastic cover to
the mounted holder.
Stick the remote control on the
magnified holder.
Inserting the remote control
Press a pointed tool into the
hole next to the battery cover
and slide open the cover.
Place the delivered 3 V CR2450
(Lithium) battery with + (plus
pole) facing upwards into the
battery compartment and close
Uncover the setting worms
Extract the awning. Remove the
two phillips screws on the inside of
the left flank of the cassette.
Remove the cover 1.
156 | ENGLISH
6
screws.
7
battery
it again.
8
1 2