Hornbach LOAN Original Installation And Operating Manual page 154

Fastening the awning
After all mounting brackets 6
have been mounted prop-
erly you can fix the awning. At
least two ladders or treads are
required in order to obtain the
required height. Ensure that the
ladders/treads are firmly rest-
ing on the ground. Only use
ladders/treads suitable for such
assembly work.
Insert the awning into brackets 6
as shown on the right. Then im-
mediately secure
it with three bolts and washers
to each brackets. Tighten the
bolts firmly.
Hand crank eyelet 1x
Insert the hand crank eyelet 2
into the opening on the left side
of the awning until it is locked in
154 | ENGLISH
2
3
place.