FujiFilm FIJINON GF30mmF5.6 T/S Owner's Manual page 18

Before Using This Product
The lens may not perform as expected and some features may not be
available with outdated lens or camera firmware. Be sure to update the
lens and camera firmware to the latest versions. Instructions on viewing
firmware version information and updating firmware are available from
the following website:
https://fujifilm-x.com/support/download/firmware/
If you do not have access to a computer, support is available from the
local distributor listed in the "FUJIFILM Worldwide Network" material
provided with your camera.
Product Care
• When using a lens hood, do not pick up or hold the camera using only the
hood.
• Keep the lens signal contacts clean.
• Use a blower to remove dust and lint from the glass surfaces of the lens or filter.
To remove smudges and fingerprints, apply a small amount of lens cleaner
to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center
outwards using a circular motion, taking care not to leave smears or touch the
glass with your fingers.
• Never use organic solvents such as paint thinner or benzene to clean the lens.
• Attach the front and rear caps when the lens is not in use.
• Store the lens and filter in cool, dry locations to prevent mold and rust. Do not
store in direct sunlight or with naphtha or camphor moth balls.
• Keep the lens dry. Rusting can cause irreparable damage. Wipe off rain and
water droplets.
• Leaving the lens in extremely hot locations could cause damage or warping.
EN-4
ENGLISH