Sharp FX-S120B Operation Manual page 41

Function
Confirmation of
MAC address
Display Wi-Fi
network status
Wi-Fi connection
with a router
(without the
Wireless LAN
connection
Button)
- AP (Access Point)
mode -
1.
Select " " by following Steps 1 - 3 on page 12.
2.
Press "Switching Display" Button to display MAC address.
3.
Complete
♪
1.
Select " " by following Steps 1 - 3 on page 12.
2.
After displaying "
the Wi-Fi adapter will be displayed.
Connection is stable
Wi-Fi adapter is off
Please turn on Wi-Fi adapter.
Router is not registered
Please perform the Wi-Fi
connection with the router.
Link settings with the App is not
performed
Please perform the link settings
with the smart device.
3.
Complete
♪
1.
Select " " by following the Steps 1 - 3 on page 12.
2.
Perform Wi-Fi connection of the air purifier and the router based
on the App screen.
Refer to the App for further operations.
Blink Blink
Display while setting the
connection between the
product and the router.
A connection error is occuring if "
and try again.
EN-15
Setting
♪ ♪ ♪ ♪ ♪
For example:
In case MAC address is "12:34:56:AB:CD:EF".
" for a few seconds, the network status of
Wi-Fi adapter network error
Network error between the air
purifier and the router
Network service error
weak
Once connected, the receiver
level will be displayed.
" is displayed. Please confirm the router
♪ ♪ ♪
～
Please turn off Wi-Fi adapter
and turn on again after a while.
Please confirm the network
status of the router.
Please turn off the air purifier
and confirm the internet status,
then try again.
Light up
strong