Table of Contents
Advertisement
4.
Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
ASCR, Motion Sync, Adaptive-Sync, Position (VGA only), Focus (VGA
only), and Auto Adjust (VGA only), from this main function.
Splendid
EyeCare
Color
Image
Signal
•
Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
•
Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
•
Aspect Control: Adjusts the aspect ratio to "Full", "1:1 Ratio".
•
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
•
Motion Sync: Check to decrease motion blur and minimize ghosting part
when on-screen objects are fast moving. When this function is turned on,
the screen may flash slightly and the brightness will decrease.
•
Adaptive-Sync: It can allow a Adaptive-Sync supported graphics source
to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
•
Position (VGA only)：Adjusts the horizontal position (H-Position) and
the vertical position (V-Position) of the image. The adjusting range is from
0 to 100 (Only available for VGA input).
•
Focus (VGA only)：Reduces Horizonal-line noise and Vertical-line noise
of the image by adjusting (Phase) and (Clock) separately. The adjusting
range is from 0 to 100 (Only available for VGA input).
•
Auto Adjust (VGA only)：Automatically adjust the image to its
optimized position, clock, and phase. (Only available for VGA input.)
3-6
VY229HE
1920 x 1080
60 Hz
Sharpness
40
60
Trace Free
Aspect Control
ASCR
Motion Sync
Adaptive-Sync
Position
Focus
Splendid
Signal
Standard Mode
HDMI
Back/Exit
Chapter 3: General Instruction
Btightness
65
Enter
Advertisement
Table of Contents
