pTron Pulsefit P461 User Manual

Caution:
1) This smartwatch is not a medical device.
2) A Thin Transparent Protective Film Covers the Sensor at the Backside of the Dial, protecting the Sensor Glass from scratches & dust.
3) Smartwatch giving reading for non-living objects is normal and common amongst most of the brands.
Sr. No Function Detailed Description
1. Turn off the smartwatch before charging.
2. Simply hold the 2-pin connector of the USB charging cable near the 2 small round magnetic charging interfaces. The connector will get connected to the interface
through the magnetic pull. It's a completely sealed system free of exposed contacts. Plug the USB end of the cable into a DC 5V/1A power source.
Charging the
1 3. When the smartwatch is fully charged, remove it from charging and unplug the USB charging cable from the power source.
Smartwatch
NOTE : You can directly check the charging by pressing the crown-like button on the right side of the dial. Pressing once will show the charging status on the display.
For downloading the App go to Playstore/IOS app store and search 'pTron Fit+'. Now, download and install the app
OR
Switch on the smartwatch; now slide the screen from top to bottom, and there you will find an icon with a QR code logo.
Just tap or touch this logo one time, and then you will get a QR code on the display screen where you can easily scan the
Downloading
2
QR code from your mobile phone. After scanning, you will get a link, i.e.,
'pTron Fit+' App
https://ptron.in/pages/ptron-app-for-smartwatches
Just click on this link, and you will get app download options for both Android and iOS.
1. After mobile App installation, open the App and set up your profile.
2. Now, go to the app setting option and there you will find "Bind device".
3

Pairing

3. Click on "Bind device" & then select your smartwatch i.e, pTron Watch4.
4. In this way your smartwatch will get paired with your smartphone.
1. Press the crown button of the Smartwatch to awaken the smartwatch display.
2. Now, open the Bluetooth function on your smartphone.
3. Search for "pTron_Audio" in the available Bluetooth devices list.
4

Audio Connectivity

4. Click and connect with "pTron_Audio".
5. Now, the smartwatch is connected with the mobile for calling & music purpose.
Important:
Keep the smartwatch closer to your mouth while making or receiving calls through this watch for clearer voice capture.
Pulsefit P461
Bluetooth Calling Fitness Smartwatch
User Manual