pTron Force X12S Product Manual

Force X12S Bluetooth Smartwatch - Product Manual
Caution:
1) This smartwatch is not a medical device.
2) A Thin Transparent Protective Film Covers the Sensor at the Backside of the Dial, protecting the Sensor Glass
from scratches.
3) Smartwatch giving reading for non-living objects is normal and common amongst most of the brands
Rotating Crown
Power On/Off Button

Charging the Smartwatch

1. Turn OFF the Smartwatch before Charging.
2. Simply, hold the 2-pin connector of the USB charging cable near the 2 small round magnetic charging
interfaces. The connector will get connected to the interface through the magnetic pull. It's a completely sealed
system free of exposed contacts. Plug the USB end of the cable into a DC5V/1A power source.
3. When the smartwatch is fully charged, remove the watch from charging and unplug the USB charging cable
from the power source.
NOTE: You can directly check the charging by pressing the crown-like button on the right side of the dial.
Pressing once will show the charging status on the display.
Downloading the 'pTron Fit+' Mobile App
1. For downloading the App go to Google Playstore/iOS Appstore and search for 'pTron Fit+'. Now, download
and install the app.
OR
2. Switch on the smartwatch, tap 1 time on the screen, then slide the screen 5 times from bottom to top, and
there you will find an icon with the name QR code along with a QR code logo. Just tap/touch 1 time this logo and
then you will get a QR code on the screen. Now, you can scan the QR code from your mobile phone. After
scanning you will get a link i.e,
https://ptron.in/pages/ptron-app-for-smartwatches