pTron Force X11Q Product Manual

Force X11Q Bluetooth Smartwatch - Product Manual
Caution:
1) This smartwatch is not a medical device.
2) A Thin Transparent Protective Film Covers the Sensor at the Backside of the Dial, protecting the Sensor Glass
from scratches.
3) Smartwatch giving reading for non-living objects is normal and common amongst most of the brands

Charging the Smartwatch

1. Turn OFF the Smartwatch before Charging.
2. Simply, hold the 2-pin connector of the USB charging cable near the 2 small round magnetic charging
interfaces. The connector will get connected to the interface through the magnetic pull. It's a completely sealed
system free of exposed contacts. Plug the USB end of the cable into a DC5V/1A power source.
3. When the smartwatch is fully charged, remove the watch from charging and unplug the USB charging cable
from the power source.
NOTE: You can directly check the charging by pressing the crown-like button on the right side of the dial.
Pressing once will show the charging status on the display.

Downloading the Mobile App - pTron Fit+

1. For downloading the App, open Google Play store or Apple Store on your device and search for 'pTron Fit+'
Please download the App and install it on device.
OR
1. Switch on the smartwatch, slide the screen from bottom to top and there you will find an icon with a QR code
logo.
2. Just tap/touch 1 time this logo and then you will get a QR code on the display screen.
3. You can easily scan the QR code from your mobile phone. After scanning you will get a link i.e
https://ptron.in/pages/ptron-app-for-smartwatches
Scan the QR code as per your device's operating system - Android or iOS.
Just click on this link and you will get app download option for both Android as well as iOS.

Pairing

1. Post mobile App installation, open the App, and set up your profile.
2. Go to the smartwatch option and there you will find "Bind device".
3. Click on "Bind device" then select your smartwatch.
4. By doing this your smartwatch will get paired with your smartphone.