Force X10 Bluetooth Calling Fitness Smartwatch - Product Manual
Caution:
1) This smartwatch is not a medical device.
2) A Thin Transparent Protective Film Covers the Sensor at the Backside of the Dial, protecting the Sensor Glass
from scratches.
3) Brand has changed smartwatch operating system wef. 01-09-2022.
Charging the Smartwatch
1. Turn OFF the Smartwatch before Charging.
2. Put the smartwatch on the charging adapter and gently push the dial down to make sure that the 2 small round
charging contacts at the backside of the dial are touching the 2 charging points in the adapter. It's a completely
sealed system free of exposed contacts. Plug the USB end of the cable into a DC5V/1A power source.
3. When the smartwatch is fully charged, remove the watch from charging and unplug the USB charging cable
from the power source.
Note: You can directly check the charging by pressing the crown-like button on the right side of the dial. Pressing
once will show the charging status on the display.
Downloading the Mobile App - pTron Fit+
1. For downloading the App, open Google Playstore or Apple Store on your device and search for 'pTron Fit+'
Please download the App and install it on device.
OR
1. Switch on the smartwatch, tap once on display, then slide the screen 5 times from bottom to top. You will see
an icon with the name 'QR code' and a QR code.
2. Just tap once on the QR code icon to open the mobile app QR on the screen. Scan the QR on your mobile
phone.
3. After scanning you will see a web page i.e https://ptron.in/pages/ptron-app-for-smartwatches
Scan the QR code as per your device's operating system - Android or iOS.
Just click on this link and you will get app download option for both Android as well as iOS.
Pairing
1. Post mobile App installation, open the App, and set up your profile.
2. Go to the smartwatch option and there you will find "Bind device".
3. Click on "Bind device" then select your smartwatch.
4. By doing this your smartwatch will get paired with your smartphone.
Need help?
Do you have a question about the Force X10 and is the answer not in the manual?
Questions and answers