HOMCOM EF140N Installation And User Instruction Manual page 9

Instructions for use
WARNING: Before plugging in or using this appliance, ensure you have read and
understood this entire manual, including all safety information. Failure to do so could
result in electric shock, fire, serious injury or even death.
Methods of operation
Control the fireplace with the switch, located on the right side of the cold air inlet. Or use
the remote control.
Manual Operation
The switches are on the right side of the cold air inlet. Ensure the standby switch is on.
Press the power button to turn on the appliance and fire effect. A red indicator light will
appear, meaning the function is on. Hold the power button for three seconds – this will
control the colour of the flame.
Press the 1000W button for the low heat setting. Press again to switch it off.
Press the 2000W button for the high heat setting. Press again to switch it off.
9