Toro Groundsmaster e3200 Installation Instructions Manual page 2

3
Removing the Existing Baffles
No Parts Required
Procedure
Note:
In the steps below, the bolts are threaded into the mower deck. Remove the nuts before removing the
bolts.
1. Remove the 2 flange nuts that secure the baffles in place
2. Remove the 2 bolts and 2 nuts from the adjustable flow baffle
3. Remove the 3 bolts and 3 nuts that secure the baffles in place
Note:
Retain the baffles and fasteners for use when changing back to side-discharge mode.
(Figure 2).
(Figure
(Figure
Figure 2
2
2).
2).
g455051