Setting And Operating Requirements - Panasonic F-PXV35M Operating Instructions Manual

SAFETY PRECAUTIONS
Do not place the product near
combustible materials such as
lighted cigarette, incense, etc.
(Otherwise, these may be absorbed
into the product with possibility of fire.)
When carrying the product,
please hold the left and right
handles, but not the front
panel.
(Otherwise, the product
may fall off, injury may
occur.)

SETTING AND OPERATING REQUIREMENTS

Area that can enhance the effectiveness!
Way to against PM2.5 and indoor dust, etc.
We recommend you to place the product on flat floor in
the room.
Way to circulate air more effectively.
Place the product with its left, right and top about 30 cm or more away from walls, furniture or
curtains, etc. Otherwise, the pollutants are difficult to be cleared.
To ensure effectiveness of this product, keep its back at least 1 cm away from the wall.
If the product is used in the same
place for a long period.
It may result in dirty surrounding walls or
floor. We recommend that you move the
product away from where it is placed when
maintaining it.
Do not use the same power socket
with TV, radio, etc.
(Otherwise, visual disturbances or noises may
be caused.)
In this case, insert the power plug into another
→
power socket.
Do not place obstacles on the
product air inlet and outlet.
(Otherwise it may affect product performance.)
4
CAUTION
When disconnecting the power
plug, hold the power plug
instead of the power cord.
(Otherwise, the power cord may be
damaged with the possibility of fire or
electric shock.)
Keep the room well-ventilated
when using the product
together with a burner.
(Otherwise, carbon monoxide poisoning
may occur.)
This product cannot remove carbon
monoxide.
Do not set the product in the
following places.
Where the product will be exposed directly to
sunlight, outlet of air conditioner or heat, etc.
(Otherwise, deformation, degeneration,
discolor or malfunction may be occurred.)
Near equipment such as TV and radio.
(Otherwise, visual disturbances or noises may
be caused.)
Keep the product 1 m or above away from such
→
devices.
Do not place any object on the
product.
(Otherwise, an operation error or malfunction
may be caused.)
Please strictly follow