Page 1
5. Knurled Handle 2. Serial Number 6. Locking Knob 3. Inch/Pound Scale | Foot/Pound Scale 7. Centre Line ( MTW200I, MTW150F, MTW80F) 8. N/m Scale 4. Fine Scale 9. Forward / Reverse Lever *NOTE: ONLY MEASURE TORQ IN CLOCKWISE DIRECTION*...
Page 2
Micrometer Torque Wrenches Micrometer Torque Wrenches General Safety Warnings Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in injury. Save all warnings and instructions for future reference. Keep out of reach of Childern Never apply more torque than the maximum scale reading.
Page 3
Micrometer Torque Wrenches Micrometer Torque Wrenches How to use Torque Wrench WARNING:! Always use eye protection while using hand tools. 1. Set desired torque, then tighten the locking knob (6) in a clockwise rotation. 2. Attach the socket to the Square Drive (1) and ensure the Forward / Reverse Lever (9) is set to tighten.
Page 4
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For further details please visit www.kincrome.com.au or call us. Due to...