PRESONUS Eris Pro Sub 10 Owner's Manual page 13

3 Tutorials
3.2 Level Calibration
Below is a brief tutorial on how to level match your monitors:
1. Connect your monitors and Eris Pro Sub 10 as shown
either of the hookup diagrams in Section 2.2.
Power User Tip: If your system has an EQ in it, turn it off or set it to flat. You can EQ
your complete system to taste once the levels are evenly matched.
Eris 4.5BT Active Speaker
2. Turn your Eris Pro Sub 10 and your full-range monitors'
input levels to their lowest setting.
3. Play pink noise through your speakers. You should not hear anything yet.
Eris 4.5BT Active Speaker
Eris Pro Sub 10
SPL:
82 dB
Eris Pro Sub 10
®
Owner's Manual
11