Table of Contents
Advertisement
DRAFT
including time, location, and elevation for
each point.
Viewing the Current Activity
By default, the device automatically
starts recording your path as an activity
when it is turned on and has acquired
satellite signals. You can pause and start
recording manually.
1 Select Recording Controls.
2 Select
and
to view an option:
•
To control the current activity
recording, select
•
To view data fields for the activity,
select
.
•
To view the current activity on the
map, select
.
•
To view the elevation plot for the
current activity, select
Navigating a Saved Activity
1 Select FIND > Recorded Activities.
2 Select an activity.
3 Select Go.
Map
represents your location on the map.
As you travel,
moves and displays
your path. Depending on your zoom level,
waypoint names and symbols may appear
Quick Start Manual
on the map. You can zoom in on the
map to see more detail. When you are
navigating to a destination, your route is
marked with a colored line on the map.
Changing the Map Orientation
1 From the map, select MENU.
2 Select Map Setup > Orientation.
3 Select an option:
•
•
.
•
Compass
.
When navigating,
destination, regardless of the direction
you are moving. When
the top of the electronic compass,
you are traveling directly toward your
destination. If
direction, turn until it points toward the
top of the compass.
Select North Up to show north at
the top of the page.
Select Track Up to show your
current direction of travel at the
top of the page.
Select Automotive Mode to show
an automotive perspective with
the direction of travel at the top.
points to your
points toward
points any other
11
Advertisement
Table of Contents
