Advertisement
_IL WARN(NG:
When servicing,
use only identical
Craftsman replacement
parts. Use of any
other part may create a hazard or cause product
damage.
_
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based
products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken or
destroy plastic.
Do not abuse power tools. Abusive practices can
damage tool as well as workpiece.
_
WARN(NG:
Do not attempt to modify
this worklight or create accessories not
recommended
for use with this worklight. Any
such alteration or modification
is misuse and
could result in a hazardous condition leading to
possible serious personal injury.
BULB
REPLACEMENT
See Figures 4 & 5.
When purchasing replacement bulb, request recom-
mended part number 780115002. See Figure 5.
TO REPLACE BULB:
[]
Remove battery pack from worklight.
See Figure 2.
[] Depress button located on top of ]en cover then
pull lens cover to remove.
[] Remove old bulb from spring by twisting bulb in a
clockwise direction.
[] Insert new bulb in spring by twisting bulb in a
clockwise direction.
[] Replace lens cover aligning tabs inside lens cover
with slots on housing then snap into place.
[] Replace battery pack.
Note: For your convenience, your worklight has a bulb
storage area to store an extra bulb. See Figure 5.
PULLLENS
COVERFORWARD
TO REMOVE
DEPRESS
BUTTON
LENSCOVER
BUTTON
SPRING_
TABS
\_
REQUEST BULB PART NO.
780115002
BULB
8TORAGEAREA
SLOT
Fig. 4
Fig. 5
Advertisement
