Miele CVA 7840 Operating And Installation Instructions page 67

 Take the dispensing unit apart,
separating it into 3 components: the
Y-piece, the spouts and the holder.
Cleaning the central spout
Only ever clean the central spout's
stainless steel cover by hand using
warm water and a little washing-up
liquid.
 Clean all parts thoroughly by hand.
Tip: With the exception of the stainless
steel cover, all parts of the central spout
should be cleaned in the dishwasher
from time to time to give them a
thorough clean. This will remove coffee
deposits and milk residues effectively.
Cleaning and care
 Clean the area around the central
spout with a damp sponge cloth.
Inserting the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water first.
Make sure that all parts are tightly
connected to one another.
 Fit the dispensing unit back together.
 Press down firmly so that the spouts
become securely connected to the
holder.
 Slide the dispensing unit into the
coffee machine.
67