Toyotomi TAN-A10SC User Manual page 20

3. Remove the wire clip; connect
the power connection wire to
the wiring terminal according
to the color; tighten the
screw and then fix the power
connection wire with wire
clip.
NOTICE
• The wiring board is for reference only, please refer to the actual
one.
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
Step 8:
Bind up pipe
1. Bind up the connection pipe,
power cord and drain hose with
the band.
2. Reserve a certain length of
drain hose and power cord for
installation when binding them.
When binding to a certain degree,
separate the indoor power and
then separate the drain hose.
3. Bind them evenly.
4. The liquid pipe and gas pipe should be bound separately at the
end.
NOTICE
• The power cord and control wire can't be crossed or winding.
• The drain hose should be bound at the bottom.
blue black brown
connection
pipe
indoor power cord
20
yellow-
green
Outdoor unit
connection
indoor and
outdoor power
cord
gas
pipe
liquid pipe
band
drain hose
drain hose band
GB