Remote Control; Battery Installation; Functions Of The Remote Control Buttons - Kenwood dmx129bt Instruction Manual

Monitor with receiver
Hide thumbs Also See for dmx129bt:
Table of Contents

Advertisement

Remote control

This unit can be operated using the remote control
KCA-RCDV340 (optional accessory).
#
CAUTION
• Put the remote control in a place where it will
not move during braking or other operations.A
dangerous situation could result, if the remote
control falls down and gets wedged under the
pedals while driving.
• Risk of fire or explosion if the battery is replaced by
an incorrect type. Ensure to replace only with the
same type.
• Risk of fire, explosion or the leakage of flammable
liquid or gas if the battery is left in an extremely
high temperature surrounding environment and/
or subjected extremely low air pressure. The battery
pack or batteries shall not be exposed to excessive
heat such as sunshine, fire or the like.
• Risk of fire, explosion or the leakage of flammable
liquid or gas if the battery is disposed into fire or a
hot oven, recharged, shorted, mechanically crushed
or cut of the battery.
• If spilled fluid comes in contact with your eyes or on
clothing, immediately rinse with water and consult
a physician.

Battery Installation

If the remote control operates only over shorter
distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace
the both batteries with new ones.
1
Insert two "AAA"/"R03"-size batteries with
the and poles aligned properly, following the
illustration inside the case.
Functions of the Remote control
Buttons
Ñ Switch the operation mode
Turn its operation mode switch to "DVD."
16
AUD ·
DVD·
T V·
Ñ Basic Operation
• Aim the remote control directly at the remote sensor
on the faceplate.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
1
2
3
4
5
• Switches to the source to be played.
1
SRC
• In hands-free mode, hangs up the
phone
Displays the Audio screen. (P.14)
2
AUDIO
L
Plays or pauses.
3
During tuner source, select FM/ AM
4
FM+
band to be received.
AM–
E
Selects the track or file to be played.
5
During tuner source, switches to
F
broadcast stations received by the
unit.
VOL R S Adjusts the volume.
6
When a call comes in, answers the
7
call.
Mutes/restores the sound
8
ATT
Not used.
– Other
6
7
8

Advertisement

Table of Contents
loading

Table of Contents