Basics; Functions Of The Buttons On The Front Panel; Common Operations - Kenwood dmx129bt Instruction Manual

Monitor with receiver
Hide thumbs Also See for dmx129bt:
Table of Contents

Advertisement

Basics

Basics
Functions of the Buttons on the
Front Panel
1
2
3
4
5
6
1 Remote Sensor
• Receives the remote control signal.
2 8MENU
• Displays the HOME screen. (P.5)
• Press and hold second turns the power off.
• When the power off, turns the power on.
3 AUD
• Displays the Audio screen.* (P.14)
* The Audio screen is not displayed during SETUP
screen or on the list screen etc,
4 + , – (Volume)
• Adjusts volume. The volume will go up until 15
when you keep pressing [ + ].
5 MUTE/ DISP OFF (Display off)
• Mutes/restores the sound.
• Press and hold turns the screen off.
When the screen is off, touch the display to turn
on the screen.
6 Reset
• If the unit or the connected unit fails to operate
properly, the unit returns to factory settings
when this button is pressed.

Common operations

Ñ Turning on the power
1
Press the <8MENU> button.
4
Ñ Turning off the power
1
Press and hold the <8MENU> button.
Ñ Adjusting the volume
1
Press the <+> or <–> button.
NOTE
• The volume will go up until 15 when you keep
pressing [ + ].
Ñ Mutes the sound
1
Press the <MUTE> button.
⿠To restore the sound, touch the button again, or
adjust the volume.
Ñ Turn off the screen
1
Press and hold the <MUTE> button.
⿠To turn on the screen, touch the display.

Advertisement

Table of Contents
loading

Table of Contents