CYBEX 16121-999-4 AC Owner's Manual
  1. Manuals
  2. Brands
  3. CYBEX Manuals
  4. Fitness Equipment
  5. 16121-999-4 AC
  6. Owner's manual

CYBEX 16121-999-4 AC Owner's Manual

Plate loaded smith press
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Plate Loaded Smith Press
Owner's Manual
Part Number
16121-999-4 AC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 16121-999-4 AC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for CYBEX 16121-999-4 AC

Summary of Contents for CYBEX 16121-999-4 AC

  • Page 1 Plate Loaded Smith Press Owner's Manual Part Number 16121-999-4 AC...

  • Page 3: Table Of Contents

    Cybex logo are registered trademarks of Cybex International, Inc. DISCLAIMER: Cybex International, Inc. makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes.

  • Page 4: Safety Guidelines And Practices

    • Fasteners must have a minimum of 500 lbs. tensile capacity. Cybex recommends .3/8” grade 2 bolts or better. A minimum pull force of 220 lbs/100 kgs is required for each anchor position.

  • Page 5: User Safety Precautions

    • DO NOT pin weights on selectorized equipment in an elevated position or use the machine if found in this position • DO NOT increase weight resistance on equipment by any means other than those provided by Cybex. • DO NOT wear loose or dangling clothing or jewelry while using equipment. Stay clear of moving parts.

  • Page 6: Label Placement

    Label Placement The following diagram shows where each label is located. Page 6 of 22...
  • Page 7 Description DE000001-X 16120-340-X 16120-341-X Page 7 of 22...

  • Page 8: Assembly

    Assembly Machine Specifications Total Weight and Size: Plate Loaded Smith Press 16121 Weight Machine Dimensions at Rest Machine Dimensions at Use 380 Lbs 84” W × 54” L × 84” H 84” W × 54” L × 84” H 173 Kg 213 cm W ×...

  • Page 9: Verify Parts List Shown Below

    Temperature The unit is designed to function normally in an environment with an ambient temperature range of 50° F (10° C) to 104° F (40° C). The unit can be shipped and stored in an environment with an ambient temperature range of 32° F (0°...

  • Page 10: Assembly Procedure

    Assembly Procedure Three people will be required for this procedure. TIP: Read and understand all instructions thoroughly before assembling this unit. Check all items carefully. If there is damage, see the Customer Service section of this manual for proper procedure to return, replace, or reorder parts.
  • Page 11 6. Secure back frame mount to frame with the four BHSCS and locknuts from the shipping package using a 7/32” Allen wrench and 9/16” wrench. Description Back frame mount Screw Locknut Install weight bar assembly 1. Place weight bar on frame and secure in place by latching bar catch on hooks. 2.
  • Page 12 • Fasteners must have a minimum of 500 lbs. tensile capacity. Cybex recommends .3/8” grade 2 bolts or better. A minimum pull force of 220 lbs/100 kgs is required for each anchor position.
  • Page 13 Verify proper operation Page 13 of 22...

  • Page 14: Exercise

    Exercise Intended Use The intended commercial use of this machine is to aid exercise and improve general physical fitness. Instructions TIP: Read and understand all instructions and warnings prior to using this machine in the Safety section of the Owner’s Manual. All adjustment points on the machine have yellow handles or knobs.

  • Page 15: Maintenance

    Cybex International, Inc. is not responsible for performing regular inspection and maintenance actions for your machines. Instruct all personnel in equipment inspection and maintenance actions and also in accident reporting and recording. Cybex International, Inc. representatives are available to answer any questions that you may have. Warnings TIP: Read all warnings in this chapter.

  • Page 16: Weekly Procedures

    Then Dampen a soft white cloth with rubbing alcohol. More Difficult Stains Gently rub stained area. (Alternative Method) Dampen a clean soft cloth in water and rinse area. Apply a light coat of furniture wax for 30 seconds. Restoring Luster Lightly rub area using a clean white cloth.

  • Page 17: Yearly Procedures

    • Hammer • 3/16” Pin punch Four types of cable tension adjustment are used on Cybex Strength Systems: Jam Nut Adjustment This type of adjustment uses a jam nut and a tension adjustment nut at the cable cam end as the primary adjustment.
  • Page 18 Description Qty. Jam nut Tension adjustment nut Rod End Adjustment This type of adjustment uses a socket head cap screw (SHCS) securing a cable rod end bearing to the machine. Primary adjustment is by turning the rod end bearing. The other end of the cable usually contains a roll pin cable adjustment.
  • Page 19 Description Qty. Cam bolt adjustment Page 19 of 22...

  • Page 20: Customer Service

    To speak with a customer service representative, call 800-351-3737 (for customers living within the USA) or 847-288-3700 (for customers outside the USA). The following information located on the serial number decal will assist our Cybex representatives in serving you. • Unit Serial Number, Product Name and Model Number •...

  • Page 21: Damaged Parts

    At Cybex’s discretion, the technician may request that you return the problem part(s) to Cybex for evaluation and repair or replacement. The technician will assign you a RMA number and will send you an ARS label. The ARS label and the RMA numbers must be clearly displayed on the outside of the package that contains the item(s) to be returned.
  • Page 22 Columbia Center III - 9525 West Bryn Mawr Ave, Rosemont, IL 60018 • 800-351-3737 • 847-288-3700 • FAX 800-216-8893 www.cybexintl.com...

Table of Contents