Table of Contents
Advertisement
3-7
Installing and Removing an M.2 Solid State Drive
Follow these instructions to install an optional M.2 solid state drive (SSD):
NOTE:
To install/remove the M.2 solid state drive use a No. 1 Phillips-head screwdriver with a screw torque
of 1.5 ± 0.2 kgf*cm
1.
Place the solid state drive into the M.2 module.
2.
Push down the solid state drive.
3.
Secure the solid state drive to the module with a single screw.
NOTE: The position of the screw will depend on the size of the SSD. Refer to the second image
below for proper placement.
4.
Install the solid state drive module into the system.
2
1
4
System Hardware Installation
- 37 -
3
Advertisement
Table of Contents
