ViewSonic VS19568 User Manual page 43

Menu Option Description
Set the Power Indicator On or Off. If the setting is set to On,
Power Indicator the power indicator lights blue when the device is turned
on.
Enable this option to allow the monitor to automatically
Auto Power Off
turn off after a certain amount of time.
Set the amount of idle time before the monitor enters Sleep
Sleep
mode.
Choose between various modes, based on power
ECO Mode
consumption.
DisplayPort 1.2 Enable DisplayPort 1.2 support.
When connecting through USB Type C:
On
When displaying 3440 x 1440 @ 75/100Hz, the video input
will only support YCbCr 4:2:2 format (please check if your
graphics card supports it)
USB 3.2
Off
When displaying 3440 x 1440 @ 75/100Hz, the video input
can support RGB format, but data transfer & Ethernet
speed will be limited to USB 2.0 due to bandwidth
limitation.
Enable this option to allow the monitor control via the
DDC/CI
graphics card.
Auto Detect Automatically detect the input signal.
All Recall Resets all settings to their default values.
43