Specifications - Makita HW001G Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Max. flow rate *1
Water flow rate *2
Max. permissible pressure
Working pressure *2
Max. feed pressure
Max. feed temperature
Max. suction height
Rated voltage
Dimensions (L x W x H) *3
Net weight
Water protection
*1: When using the trigger gun without the nozzles.
*2: When using vario spray lance.
*3: When the handle is folded and without hoses.
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Mode 3 (High mode)
Mode 2 (Middle mode)
Mode 1 (Low mode)
Mode 3 (High mode)
Mode 2 (Middle mode)
Mode 1 (Low mode)
344 mm x 383 mm x 520 mm (13-1/2" x 15-1/8" x 20-1/2")
10.3 - 13.4 kg (22.7 - 29.5 lbs)
BL4020 / BL4025 / BL4040 / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC
11 ENGLISH
HW001G
7.0 L/min (1.85 gpm)
5.5 L/min (1.45 gpm)
4.2 L/min (1.11 gpm)
3.0 L/min (0.79 gpm)
11.5 MPa (1668 PSI)
8.5 MPa (1233 PSI)
5.5 MPa (798 PSI)
3.0 MPa (435 PSI)
1.0 MPa (145 PSI)
40 °C (104 °F)
1.0 m (39-3/8")
D.C. 36 V - 40 V max
IPX5