Handling Of Discs And Tapes - Kenwood XD-750 Instruction Manual

Handling of discs and tapes
XD-750/700/550/550 (En)
Disc handling precautions
Handling
Hold compact discs so that you do not
touch the playing surtace
Label side
Play ng side
Do not attach paper or tape to either the
playing side or the label side of compact
dices
GU {12 cm, 8 cm), CDV {only the audio part)
* With CD-G (CD Graphics) discs, this unit can play only the audio.
Cleaning
It fingerprints or foreign matter become at-
tached to the disc, lightly wipe the disc with a
soft cotton cloth (or similar) from the center of
the disc outwards in a radial manner.
Storage
When a disc is not to be played for a long pe-
rid of lime, remove tt trom tne CD player ana
store it in its case
Never play cracked or warped disc.
During playback, the disc rotates at high speed in the player.
Therefore, to avoid malfunction, never use a cracked or deformed disc
or a disc repaired with tape or adhesive agent.
Notes on cassette tape
Safety tab (accidental erasure prevention tab}
After an important recording has been finished, break the safety tab,
to prevent the recorded contents from being erased or recorded on
accidentally.
N
For B side
To re-record
Aoplv tape only to the position where
the tab has been removed
Tv sture cassette tapes
Do not store the tapes in a place which is subject to direct sunlight, or
near equipment that generates heat. Keep the cassette tapes away
from any magnetic field.
When there is slack in the tape
In such a case, insert a pencil into the reel hole and wind the ree! hub
to remove the slack.
1. Longer tape than 110 minutes cassette tape
Since langor tape than 110 minutos caccotto tape ic vory
thin, the tape could adhere to the pinch roller or be easily cut
It is recommended that. these tapes not be used with this
unit to prevent possible damage.
2. Endless tapes
Do not use an endicas tape, as this could demage the mechanism of
the unit.