Page 1
IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future reference. The specifications of this product may vary from this photo, subject to change without notice. Manufacturer:Shanghai Runmi Technology Co., Ltd. Address:15th Floor, Building 21B, No.1158, Zhongxin Rd, Songjiang district, Shanghai, P.R.China Version: 9.0 MADE IN CHINA...
Page 2
Model.UR9TM0011 Strol Lite 2-in-1 Under Desk Treadmill USER MANUAL...
02 CUSTOMER SERVICE 03 IMPORTANT SAFETY INSTRUCTIONS 05 PRODUCT AND ACCESSORIES 06 SPECIFICATION 07 PRODUCT INTRODUCTION TABLE OF 08 HOW TO USE CONTENTS 10 OPERATION 12 CARE AND MAINTENANCE 14 ERROR CODE 15 TROUBLESHOOTING 16 WARRANTY...
CUSTOMER SERVICE IMPORTANT: FOR UREVO ONLY For damaged or defective product, questions, replacement parts or any other service support, please contact our customer service department by the below methods: services@urevosports.com Response Time: 24-48 hours Emailing us with the Order ID will be the best method to receive a response during peak business hours.
IMPORTANT SAFETY INSTRUCTIONS DANGER - To reduce the risk of 10. Do not use outdoors. electric shock: 11. Do not operate where aerosol (spray) products are being used or where 1. Always unplug this treadmill from the oxygen is being administered. electrical outlet immediately after using and before cleaning.
Page 7
GROUNDING INSTRUCTIONS: reception, which can be determined by turning the equipment off and on, This product must be grounded. If it should the user is encouraged to try to correct malfunction or breakdown, grounding the interference by one or more of the provides a path of least resistance for following measures: electric current to reduce the risk of electric...
PRODUCT AND ACCESSORIES Please carefully check whether the contents of the package are complete and intact. If there is any missing and damage, please contact the seller. Accessories Remote Controller Power cord x 1 Lubricating oil x 1 CR2450 Extra Battery x 1 Hex Tool ×...
SPECIFICATION Product Detailed Product Detailed configuration parameters configuration parameters 138.9 × 67.1 × 13.0 cm 133.6 × 67.1 × 100.8 cm Product dimension Product dimension (Folding) (Assembly) 54.7 x 26.4 x 5.1 inch 52.6 x 26.4 x 39.7 inch 43.2 x 108.0 cm Running Area Minimum speed 0.6 mph...
HOW TO USE Unfolded to run 1. Open the packaging box and take out the treadmill with the related accessories from the box. 2. Lift up handrail untill end position. 3. Turnning side lock dail to the OFF postion (same operation on both sides). NOTE : Handrail MUST fixed security before running.
Page 12
Folded to walk 1. Turnning side lock dail to the ON position. 2. Fold down handrail untill in lined with foot rail. 3. Start to walk mode with remote control. Moving 1. If transportation needs, unplug power cord and lifting the terminal of treadmill. 2.
OPERATION Console Mobile Phone Placement Slot Emergency Stop Key (STOP) S TO P Button Function Button Function Emergency Stop. Short or long press this button to decelerate at per 0.2 miles. Speed shortcut button: Press this button directly to adjust the speed to 3mph.
Page 14
Display Screen Speed Calories Time Distance kcal Infrared receiver port Name Range Display Speed 0.6-7.6 mph The speed of walking belt; Calories 0001-9999 Kcal The approximate number of calories of you have burned; • The time elapsed time ; Time 01-99 minutes •...
CARE AND MAINTENANCE Symptom : walk belt off centered or slips. Centering walk belt process as follow : 1. Power off treadmill and unplug the power cord . 2. Manual centering process as follow: • If the walk belt has shifted to left, use the hex tool to turn the left idler roller screw clockwise 1/4 of a turn(refer to figure 1).
Page 16
Belt lubrication process, follow instruction below to lubricate belt. 1. Power off appliance and unplug cord. 2. Using the hex tool, turn both idler roller screws counterclockwise till belt loosen and lifting easily. Tips: please markdown hex tool rotating cycles when loosen belt, which use for adapting belt tension after lubrication process.
ERROR CODE Error Code Fault Analysis Resolutions Unscrew motor hood and verify connection between controller and numeric display. Communcation Please contact with after sale service if E01 interrupted between code has not been eliminated. contoller and numercic display. Notice: Always power off and unplug power cord before processing.
TROUBLESHOOTING Problem Fault Analysis Resolutions 1. Power rock switch 1. Replace new power rock switch if it doesn't dyfunction light on. No working 2. Power supply 2. Make sure that power cord is plugged into interrputed. properly grounded outlet. 3.Power cord damaged 3.
7. Improper operation, alteration, handling, storage, abuse or neglect of the products. UREVO , using its sole discretion, will either repair or replace free of charge any part(s) proven to be defective under normal home use. Any repair or replacement shall provide no new warranty coverage, but shall retain only the remaining portion of the original product’s warranty.
Need help?
Do you have a question about the Strol Lite 2-in-1 and is the answer not in the manual?
Questions and answers