Technical Specifications - Evolite Double Spin Spark User Manual

Risk of electric shock.
 Always unplug the unit before servicing.
Here are some suggestions if you are having problems with your device.

The device does not work at all.
o
Check the power cord and fuse.
o
Make sure that your outlet is well powered.

The fixture does not respond or does not respond correctly to DMX commands.
o
Check your DMX cables
o
Check your DMX addressing
o
Try another DMX controller
o
Make sure that your DMX cables do not run close to high-voltage cables, which could cause interference.

No sparks are produced
o
Check that the powder level in the tank is sufficient
o
Perform an internal cleaning using the Clean function.
Display
E01
E02
E03
E04
E05
 Technical specifications
Model
Supply voltage
Power connector
Power consumption
Control protocol
Number of DMX channels
Approvals
Dimensions and weight of the device
alone :
DOUBLE SPIN SPARK Manual Ver. 1.00
DANGER!
Cause of the problem
Heating failure
The heating is not
controlled
The internal
temperature of the
machine is extremely
high
The air blower does not
work
The sensor is defective Contact your service technician
DOUBLE SPIN SPARK
230v 50Hz
Neutrik Powercon type socket
1300W
DMX 512
2 or 4
CE / RoHs /
365 x 365 x 400mm
Solution
Contact your service technician
Contact your service technician
1. Check the cooling fan.
2. Turn off the heater and operation,
restart after 10 minutes.
3. Check for foreign objects falling
into the nozzle.
4. Contact your service technician
EN 2014/30/EU, EN 2011/65/EU , EN 2014/35/EU
/ 20kg
Page 16