Specifications and Application
•
Specifications and ordering information are in the Slimline Power System Brochure available at
www.abbpowerconversion.com
•
External Surge Protective Devices (SPDs) - are required on all AC inputs.
Equipment Safety is Approved in IEC 60664-1 Installation Category II environments.
•
Equipment and subassembly ports:
1.
are suitable for connection to intra-building or unexposed wiring or cabling;
2.
can be connected to shielded intra-building cabling grounded at both ends.
•
Grounding / Bonding Network – Connect to an Isolated Ground Plane (Isolated Bonding Network) or an Integrated Ground
Plane
(Mesh-Bonding Network or Common Bonding Network).
•
Installation Environment - Install in Network Telecommunication Facilities, OSP, or where NEC applies.
•
Battery return may be either Isolated DC return (DC-I) or Common DC return (DC-C).
Reference Documents
These documents are available at
Document
Title
850035894
Galaxy Pulsar Edge Quick Start Guide
CC848815341
Pulsar Edge Controller Family Product Manual
Slimline Power System Brochure
Page 5
2023 ABB. All rights reserved.
www.abbpowerconversion.com
SPS Shelf L002_QSG
Rev 5.0