Table of Contents
Advertisement
Motherboard Manual
Step 2: Insert the DIMM vertically and firmly into the slot until the retaining clips
snap back in place and the DIMM is properly seated.
Note1: The DIMM must be installed to DDR3_A1 slot first.
Note2: If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
B. Memory Capacity
DIMM Socket Location
DDR3_A1
DDR3_B1
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
Disabled
Enabled
(O means memory installed, X means memory not installed.)
Note: The DRAM bus width of the memory module must be the same (x8 or x16)
6
DDR3L Module
512MB/1GB/2GB/4GB/8GB
512MB/1GB/2GB/4GB/8GB
DDR3_A1
O
O
Total Memory Size
Max is 16GB.
DDR3_B1
X
O
Advertisement
Table of Contents
