Bosch AMP Share Professional GAL 18V6-80 Original Instructions Manual page 8

8 | English
Product description and
specifications
Intended use
The battery charger is intended for charging the
rechargeable Bosch AMPShare Li-Ion batteries or those of the
AMPShare partners.
Product Features
(1) Charging bay
(2) Arrow for charging sequence
(3) Red temperature monitoring/error indicator
(4) Green battery charge indicator
(5) Priority button
(6) Screwdriving
(7) L-BOXX adapter
(8) Cord wrap
Technical Data
Battery Charger
Protection class
A)
Charging current
Battery charging voltage (automatic
voltage detection)
A) Depends on temperature and rechargeable battery type
Values can vary depending upon the product and are subject to applica-
tion and environmental conditions. For further information
www.bosch-professional.com/wac.
Charging process
Pay attention to the mains voltage. The voltage of the
u
power source must match the voltage specified on the rating
plate of the charger.
The charging process begins as soon as both the mains plug
and a rechargeable battery have been inserted. If the charging
process is started with multiple rechargeable batteries simul-
taneously, they will be charged one after the other in the direc-
tion of the imprinted arrows (2) (anticlockwise).
The rechargeable batteries are charged one after the other in
two charging cycles.
– In the first charging cycle, all inserted batteries are charged
up to approx. 80 % of their capacity.
– In the second charging cycle, the rechargeable battery is
charged from approx. 80 % to full capacity. The second
charging cycle begins when all inserted batteries have been
charged to approx. 80 %.
The charging process is only possible when the temper-
ature of the battery is within the permitted charging tem-
perature range (0–45 °C).
1 609 92A 8NR | (17.10.2023)
Troubleshooting
Battery is not being charged
No battery is being charged and all six indicators (3)
simultaneously flash red.
Cause: The charger has identified an internal error.
Corrective measure: Ensure that all batteries are fully inser-
ted. Remove the mains plug and reinsert. If the error occurs
again, have the charger checked by an authorised after-sales
service centre for Bosch power tools.
Indicators do not light up
None of the indicators are lighting up, battery will not be
charged.
Cause: Plug socket, mains cable or battery charger defective
Corrective measure: Check the mains voltage. If necessary,
GAL 18V6-80
have the charger checked by an authorised after-sales service
centre.
/ II
8.0 A
Maintenance and Service
14.4–18 V
Maintenance and Cleaning
In order to avoid safety hazards, if the power supply cord needs
to be replaced, this must be done by Bosch or by an after-sales
service centre that is authorised to repair Bosch power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concerning
maintenance and repair of your product as well as spare parts.
You can find explosion drawings and information on spare parts
at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessories.
In all correspondence and spare parts orders, please always in-
clude the 10‑digit article number given on the nameplate of the
product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
For more information, you can access the online
operating instructions at
www.bosch-pt.com/manuals
Bosch Power Tools