CONTENTS OPERATIONS PAGE PARTS / ASSEMBLY PAGE Safety and Maintenance......1 - 2 Foot Stand ..........Head Rest Cushion......... 3 - 5 Cover / Bellows........Chest Cushion......... Hydraulics..........Head & Chest Extension / Retraction..Electrical..........28-29 Tilt Safeguard.......... Hydraulics Auto Drops......30-31 Drop Chest..........
Page 3
WELCOME!! Lloyd Table Company, a proud supporter of today’s chiropractors, has established the finest line of chiropractic tables in the world. Table products unique in versatility and function, designed to meet your needs. SAFETY Concerned for a safe working and treatment environment, Lloyd Table Company asks that you follow the safety tips below.
Page 4
MAINTENANCE The following steps should be performed on a regular basis to maintain your Lloyd table in a smooth operating condition and to assure its long life and top quality appearance. An initial inspection and periodic future inspections should be made to insure that nuts and bolts have not loosened in shipping or during daily operations.
The following sections provide explanations on the operation of your Lloyd table. All references to right and left, will be in relationship to your view, as you face table from the foot end. All references to the front will refer to the head end of the table.
Page 6
Standard - Deluxe Head To Elevate the Head Cushion The head cushion is assisted by a gas shock in raising the cushion. With a hand supporting the head cushion, turn the Elevation Knob (No. 2) on either side of the able upward to unlock. When the desired height is determined simply release the Elevation Knob (No.
Page 7
Optional - Deluxe Head with Drops #8 Tension Knob #7 Cocking Handle #9 Selector Knob (Right Side of Table) Operating the Straight / Toggle Drop: CAUTION: THE DROP CUSHION TENSION SHOULD BE CHECKED AND TESTED BEFORE ADJUSTING A PATIENT. NOTE - DROP SHOULD BE IN DOWN / DEACTIVATED POSITION BEFORE MOVING SELECTOR KNOB (NO.
Chest Cushion The chest cushion is designed to accommodate patients with large or small abdomen and has the versatility of being a stationary or floating cushion. #2 Spring Breakaway Knob #3 Spring Breakaway Tension Knob #1 Adjustable Chest Handle Standard - Adjustable Tilting Chest Height Adjustment of Chest Cushion Lift the rear corners of the cushion.
Head & Chest Extension - Retraction Safety Switch #1 Head/Chest/Pelvic Extension - Retraction Switch Tilt Safety Pelvic Tension Rod #2 Lock knob Chest / Pelvic Tilt Safety Switch The tilt safety switch is designed to prevent unauthorized operators from lowering the table from a Vertical position. The table cannot be lowered until the tilt Safety Switch is activated.
Page 10
DROP DORSAL & LUMBAR FULL CUSHION #2 Tension Control Knob #2 Tension Control Knob #1 Cocking Handle A Full drop cushion is a single cushion design that allows the drop to be used as single cushion drop by cocking both drops and lumbar simultaneous.
Page 11
DROP DORSAL - LUMBAR CUSHION #2 Tension Control Knob #2 Tension Control Knob #1 Cocking Handle Dorsal & Lumbar Drop - Manual Cocking the Drop Chest or Lumbar Cushion Pull up on the Cocking Handle (No. 1) to cock the desired drop cushion. Adjust the tension on either by turning the Tension Control Knob (No.
Page 12
Pelvic Drop #2 Tension Control Knob #3 Height Switch #1 Cocking Handle Pelvic Drop - Manual Cocking the Drop Pelvic Cushion Pull forward on the Cocking Handle (No. 1) to cock the cushion. Adjust the tension by turning the Tension Control Knob (No. 2) Right side: Clockwise - Decreases Tension Counterclockwise - Increase Tension...
Page 13
Automatic Cocking Drops #1 Selector Knob Automatic Drops Cervical (Head Cushion) Drop - Automatic To Cock the Cervical (Head Cushion) Drop: Rotate the selector knob (No. 1) to “C” to select the Cervical (Head Cushion) drop. Step on the white strip to activate the auto cocking drop. CAUTION: THE DROP CUSHION TENSION SHOULD BE CHECKED AND TESTED BEFORE ADJUSTING PATIENT.
Automatic Cocking Drops To Cock the Pelvic Cushion Drop: Rotate the selector knob (No. 1) to “P” to select the Pelvic drop. Step on the white strip to activate the auto cocking drop. CAUTION: THE DROP CUSHION TENSION SHOULD BE CHECKED AND TESTED BEFORE ADJUSTING PATIENT.
Master Power Switch Master Power Switch Fuse Holder The Master Power Switch is located on the front left side of the base frame. The switch is operated by pushing on the left or right side, marked with a zero or dash. ON is indicated with a dash (-) B.
Height Select Panel #1 Height Select #6 Speed Control Elevation / Tilt #3 Unload Switch Horz. Down / Tilt Up Switch #5 Elevation Height Up / Down #4 Load Switch Horz. up / Tilt Down Switch #2 Mode Switch Auto / Semi Auto / Manual Height Select (No.
Page 17
Height Select Panel #6 Speed Control Elevation / Tilt Unload button (yellow) Load Button (orange) Down Button (green) #7 Mute/Calibration Button Up Button (blue) Mute Button The mute button is a on and off switch, used to control the audable beeper of the control switches. Pushing the button and releasing will turn the beeper sound on or off .
Page 18
Height Default Setting The table’s elevation height is set at a default of twenty-two inches from the factory. The setting default automatically brings the table to the same set height when turned on each time. The Height Default can be recalibrated to meet the needs of a doctor’s personal heigth preference.
DELUXE HEAD CUSHION ASS’Y NOTE: ITEM #20 IS USED WITH THE STRAIGHT DROP HEAD CUSHION ITEM PART NO. DESCRIPTION 40110 CUSHION, HEAD - LEFT HAND 40130 CUSHION, HEAD - RIGHT HAND 29999 HEADREST PAPER 30400 SLIDE BLOCK, FRONT 22009 OVAL HD. MACHINE SCREW, #10-24 NC X 1 1/2 57174 SPACER, 3/16 ID X ½...
DELUXE HEAD FRAME ASS’Y ITEM PART N0. DESCRIPTION QTY. 56051 FASTENER PLATE ASS’Y 57221 ADJUSTMENT ARM 55929 CENTER BAR 21616 PLASTIC FLAT WASHER, ¼ ID X ¾ OD 24020 HANDLE 22050 RD. HD. MACHINE SCREW, ¼-20 UNC X 2 ½ 21450 HEX.
Page 24
DELUXE CHEST CUSHION SPRING BREAKAWAY Page 20...
Page 25
DELUXE CHEST CUSHION SPRING BREAKAWAY ITEM PART N0. DESCRIPTION QTY. 40210 CUSHION, CHEST - STANDARD 40230 CUSHION, CHEST - WIDE 51010 BRACE, CUSHION (LH) 51030 BRACE, CUSHION (RH) 20022 BOLT, HEX HEAD, 1/4 - 20 NC X 1 20361 BOLT, HEX HEAD, 3/8 - 16 NC X 1 3/4 21850 WASHER, FLAT, PLASTIC, 3/8 ID X 1 OD 55945...
Page 26
I-FRAME ASSEMBLY ITEM PART N0. DESCRIPTION QTY. 53226 I-FRAME ASSEMBLY 22904 FLANGE BUSHING 22013 MACHINE SCREW, BUTTON HD. ¼-20 UNC X ½ 21620 WASHER, FLAT, 1/4ID X 9/16OD 50872 GUIDE ROD, ½ RD X 7 7/8 21975 MACHINE SCREW, PAN HD. #6-32 UNC X 1/2 21510 FLAT WASHER, 3/16 ID X ½...
PELVIC CUSHION ASSEMBLY ITEM PART N0. DESCRIPTION QTY. 40308 PELVIC CUSHION 56375 REAR HINGE PLATE 21620 FLAT WASHER ¼ ID X 9/26 OD 20022 HEX. HD. BOLT, ¼-20 X 1 20199 SOCKET HD. SHLD. BOLT, 5/16-18 UNC 3/8 X ½ 21755 STAR WASHER, 5/16ID 53227...
Page 28
ANKLE REST ADJUSTABLE HEIGHT ITEM PART N0. DESCRIPTION QTY. 40410 ANKLE REST CUSHION 56507 BASE PLATE 30774 COMPRESSION SPRING 56519 LOCK HANDLE 56525 GUIDE BLOCK 56518 GUIDE ROD 22468 SCREW, WOOD, RD HEAD, #10 X 7/8 24236 GUARD, TEE HANDLE 22610 PIN, CLEVIS, 5/16 X 7/8 56539...
FOOT STAND ASSEMBLY ITEM PART N0. DESCRIPTION QTY. 611130 FOOT PLATE ASS’Y 22013 BUTTON HD, MACHINE SCREW, ¼-20 UNC X ½ 20613 SOCKET HC. SHLD. BOLT, 5/8 –11 UNC X ¾ 53313 FOOT STAND PIVOT FRAME ASS’Y 22520 ROLLER BEARING ½ ID 53259 BUSHING, 3/8 ID X ½...
Page 30
BELLOWS MOTOR COVER ASSEMBLY ( 616010) ITEM PART N0. DESCRIPTION QTY. 699220 BELLOWS COVER 53317 BRACKET BELLOWS 699080 COVER, CIRCUIT BOARD 699015 COVER, MOTOR 35940 CLIP, NYLON 53342 RAIL, BELLOWS 22605 MALE SNAP 21420 HEX NUT, #8-32 UNC 21105 CAP NUT, #8-32 UNC 53386 CONNECTING PIN, ¼...
Page 35
HYDRAULIC AUTO DROP (613209) ITEM PART N0. DESCRIPTION QTY. 623558 MOTOR &PUMP 45371 HYD. HOSE 3/16 X 62 20120 HEX. HD. BOLT, ¼-28UNF X 1 21630 STAR WASHER 1/4ID 21620 FLAT WASHER 1/4ID X 9/16OD 30310 SPUR GEAR, PLASTIC 57724 CONTROL ROD 3/8RD X 16 ½...
STRAIGHT DROP HEAD ASS’Y Items 49, 50, 51, 52, 53 and 54 are required only for Auto Cocking Cervical Tables. Page 32...
Page 37
STRAIGHT DROP HEAD ASSEMBLY ITEM PART N0. DESCRIPTION 56011 FASTENER PLATE ASS’Y, ’89 STRAIGHT DROP HD 57201 OUTSIDE DROP FRAME ASS’Y, ’89 FM HEAD 55850 TEE WEDGE ASSEMBLY 22017 SCREW, MACHINE, FLAT HEAD, ¼ - 20 UNC X ½ 55929 CENTER ROD ASSEMBLY 21616 WASHER, PLASTIC, ¼...
Page 38
FORWARD MOTION HEAD FRAME ASS’Y NOTE: ITEMS 28, 33, 34, 35, 36, 37, 38 & 40 ARE USED ONLY FOR TABLES WITH AUTO COCKING CERVICAL. Page 34...
Page 39
FORWARD MOTION HEAD FRAME ITEM PART NO. DESCRIPTION 56059 OUTSIDE DROP FRAME ASS’Y 57201 OUTSIDE HEAD FRAME ASS’Y 55850 TEE WEDGE 57221 ADJUSTMENT ARM, HEAD CUSHION 57175 LINKAGE BAR, 1/8 X 1/2 X 3 9/16 21995 PAN HD. MACHINE SCREW, #10-24 NC X 1/2 22860 BUSHING, 3/16 ID X 1/4 OD 30722...
Page 45
SLIDE FRAME ASSEMBLY FLEXION HEAD ITEM PART N0. DESCRIPTION QTY. 55778 SLIDE BRACKET ASS’Y 55794 LOCK FRAME ASS’Y 22865 BUSHING, ¼ ID X 5/16 OD 22657 ROLL PIN 1/8 X 3/8 22660 LOCK KNOB 22031 SOCKET HD SCREW, ¼-20 UNC X 1 ¼ 30750 COMPRESSION SPRING 55762...
Page 46
ROTATION BLOCK ASSEMBLY FLEXION HEAD Item 56 - Flexion Handle Kit #634010 Part No. Description 55838 Handle Tube 55836 Side Ass’y (RH) 55837 Side Ass’y (LH) 24023 Handle Grip 24024 Adjustable Thumb Handle 20188 Socket Hd. Bolt #10-24 22410 Pan Hd. Screw 24060 Buckle, Plastic 28108...
Page 47
ROTATION BLOCK ASSEMBLY FLEXION HEAD ITEM PART N0. DESCRIPTION QTY. 55777 ROTATION FRAME ASSEMBLY, FLEXION HEAD 55773 PIVOT ARM ASSEMBLY, FLEXION HEAD 55963 STABILIZER BRACKET ASS’Y, SWIVEL HEAD 55788 GUIDE ROD, CRADLE ASS’Y, FLEX HD, 3/8 RD X 7 5/8 21610 WASHER, FLAT PLASTIC, 0.26 ID X ½...
DROP CHEST & LUMBAR CUSHION (STANDARD OR BREAKAWAY) Note: Item #40 is used only on table’s with Breakaway Chest. Note: For Detail Parts on Breakaway Chest refer to Deluxe Chest Cushion (page 19 - 20). Page 44...
Page 49
DROP CHEST and LUMBAR ASSEMBLY (STANDARD or BREAKAWAY) ITEM PART N0. DESCRIPTION QTY. 57309 CHEST & LUMBAR FRAME ASSEMBLY 40510 CUSHION, DROP CHEST 40530 CUSHION, DROP LUMBAR 57330 MOUNTING PLATE ASS'Y 57416 COCKING HANDLE BAR (RH) 57436 COCKING HANDLE BAR (LH) 30420 DROP BLOCK, ALUMINUM (LH) 30426...
Page 51
DROP CHEST ASSEMBLY FULL CUSHION ITEM PART NO. DESCRIPTION QTY. 40235 CHEST CUSHION ASSEMBLY 57428 TEE WEDGE ASSEMBLY, FRONT, NEW DROP 57429 TEE WEDGE ASSEMBLY, REAR, NEW DROP 20022 BOLT, HEX HEAD, 1/4 - 20 NC X 1.00 20332 BOLT, HEX HEAD, 3/8 - 16 NC X 1.00 57435 BAR, STABILIZER, DROP CHEST, 1/4 X 5/8 X 6 13/16 21210...
Page 57
T-WEDGE DROP PELVIC ASSEMBLY ITEM PART N0. DESCRIPTION QTY. 40305 PELVIC CUSHION 56158 TEE WEDGE ASS’Y 20023 HEX HD BOLT, ¼-20UNC X 1 ¼ 20332 HEX HD BOLT, 3/8-16UNC X 1.00 20360 HEX HD BOLT, 3/8-16UNC X 1 ½ 22812 BALL BEARING, 3/8ID 21210 HEX NUT, 3/8-16UNC...
Page 59
HYDRAULIC AUTO DROP (613209) ITEM PART N0. DESCRIPTION QTY. 623558 MOTOR &PUMP 45371 HYD. HOSE 3/16 X 62 45-ST. 20120 HEX. HD. BOLT, ¼-28UNF X 1 21630 STAR WASHER 1/4ID 21620 FLAT WASHER 1/4ID X 9/16OD 30310 SPUR GEAR, PLASTIC 57724 CONTROL ROD 3/8RD X 16 ½...
Page 60
Trouble Error Codes Error codes are a representation of blinking lights that are emitted on the first eight height selections (18”-32”) on the Height Selection Panel. A series of blinking lights will occur if the table fails to complete a calibration cycle. If the table stops running it will follow with a continuous blinking light code.
Page 61
** 0 - represents blinking light Fault Codes generated during max raise speed test. Code Explanation Number Fault Lower time out - Horizontal not reached 0100 1001 Lower time out - Elevation Min not reached 0100 1010 PWM value too high 0100 1011 Fault Codes generated during min raise speed test.
Page 62
** 0 - represents blinking light Fault Codes generated during bleed tilt up test. Code Explanation Number Fault Tilt Time out - Horizontal not reached 1001 0001 PWM value too low 1001 0010 Fault Codes generated during min tilt up speed test. Code Explanation Number Fault Tilt down time out - Horizontal not reached...
Need help?
Do you have a question about the Galaxy 908HS and is the answer not in the manual?
Questions and answers